How capable is the XCore-200 Multichannel Audio Board
Posted: Thu Apr 12, 2018 9:21 pm
Hi,
I am thinking to design a multichannel usb audio interface and maybe to go a little beyond. I might choose to buy the XCore-200 multichannel audio board as a starter or design something similar. Before getting started, I would like to know whether the Multichannel Audio Board is capable of the following tasks (with additional programming):
1. Take stereo or multichannel audio signal either from USB or Ethernet.
2. (If it is stereo) Duplicate the stereo audio signal to multichannel (channel mapping).
3. FIR DSP on multichannel
(From 2 & 3, I can either get multichannel or stereo multi-way)
4. Oversampling the audio signal.
5. A very friendly user interface to configure some EQ / DSP. Graphic interface will be the best.
6. Take video stream as well from Eithernet
(1~6 are for audio video bridging + audio signal processing)
I suppose I don't need ADC/DAC and other digital interface from the MC audio board. However I am not sure if I need to add extra memory (standalone or simply use XUF216 instead to take advantage of the flash built in). Or maybe this is just beyond the capacity of XCORE-200.
I would appreciate your inputs.
Thanks.
I am thinking to design a multichannel usb audio interface and maybe to go a little beyond. I might choose to buy the XCore-200 multichannel audio board as a starter or design something similar. Before getting started, I would like to know whether the Multichannel Audio Board is capable of the following tasks (with additional programming):
1. Take stereo or multichannel audio signal either from USB or Ethernet.
2. (If it is stereo) Duplicate the stereo audio signal to multichannel (channel mapping).
3. FIR DSP on multichannel
(From 2 & 3, I can either get multichannel or stereo multi-way)
4. Oversampling the audio signal.
5. A very friendly user interface to configure some EQ / DSP. Graphic interface will be the best.
6. Take video stream as well from Eithernet
(1~6 are for audio video bridging + audio signal processing)
I suppose I don't need ADC/DAC and other digital interface from the MC audio board. However I am not sure if I need to add extra memory (standalone or simply use XUF216 instead to take advantage of the flash built in). Or maybe this is just beyond the capacity of XCORE-200.
I would appreciate your inputs.
Thanks.