Looking for a device with mutiple MEMS mic inputs

Technical discussions related to any XMOS development kit or reference design. Eg XK-1A, sliceKIT, etc.
Post Reply
sluwindsor1
New User
Posts: 2
Joined: Tue Jun 19, 2018 4:47 am

Looking for a device with mutiple MEMS mic inputs

Post by sluwindsor1 »

Hi,

I am looking for an XCore device on which I can plug multiple MEMS mics via I2S interface and the device can transfer the PCM audio data to PC through USB. Later, for example, I can use Matlab on the PC to do the sampling of multiple MEMS mics and further processing.

I am very new to Xcore deives, so can you plz recommend one for me?
Thank you in advance.


User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am
Contact:

Post by mon2 »

Hello. You have a few choices here on the main web page:

http://www.xmos.com/

These are the latest devices based on the XCORE-200 foundation.

Not an employee of XMOS so best to post your requirements for the best guidance. However, have learned that for example, this kit:

http://www.xmos.com/products/voice/vocalfusion-stereo

is for use with background music cancellation using onboard XMOS IP to remove music that may be blasting while you attempt to say a trigger word. One of the MEMS microphones is listening for that audio stream to remove from the stream.

The processors and related costs do vary with the functions you are seeking due to the included license with the component purchase so you may find other models to be more suitable for your project:

http://www.xmos.com/products/voice/voca ... r-circular
* if you plan to place the audio pickup board on a table and the speaker could be at any angle in the room

or

http://www.xmos.com/products/voice/voca ... ker-linear
* if you plan to place your widget as a wall mounted unit
Post Reply