This is the group for everything related to XMOS usage in robots, no matter if it's a small sumo robot or a huge biped. Post about your current projects or just some crazy idea that you'd like to try!
Read
XMOS Robotics
-
- Active Member
- Posts: 60
- Joined: Tue Feb 16, 2010 8:21 am
- Location: Sweden
-
- Active Member
- Posts: 60
- Joined: Tue Feb 16, 2010 8:21 am
- Location: Sweden
Come on, don't be shy, tell us about your robot projects! If you currently don't have anything going on, post some ideas of how the XMOS processing power could be used.
-
- Active Member
- Posts: 60
- Joined: Tue Feb 16, 2010 8:21 am
- Location: Sweden
Just to get this group started I'll like the few XMOS robotics projects I've found so far.
XRobot - Tracked robots with XDK
project pages and software for the XRobot
remote controlled
one robot with camera tracking following the other
with another robot balancing on top
Misc robots
ABE, autonomous underwater bot. Part of the XMOS challenge at Lets Make Robots.
Using sensors with XMOS boards
I2C accelerometer
SPI gyro and I2C accelerometer
10bit A/D converter
Hardware to connect C3038 or C3088 camera to XDK
Blog about implementing human recognition on XC-2
General robot builder sites
Let's Make Robots
Well, I was hoping to find more around the internet, but I'll try to keep this post updated. Feel free to contribute!
XRobot - Tracked robots with XDK
project pages and software for the XRobot
remote controlled
one robot with camera tracking following the other
with another robot balancing on top
Misc robots
ABE, autonomous underwater bot. Part of the XMOS challenge at Lets Make Robots.
Using sensors with XMOS boards
I2C accelerometer
SPI gyro and I2C accelerometer
10bit A/D converter
Hardware to connect C3038 or C3088 camera to XDK
Blog about implementing human recognition on XC-2
General robot builder sites
Let's Make Robots
Well, I was hoping to find more around the internet, but I'll try to keep this post updated. Feel free to contribute!
-
- XCore Expert
- Posts: 577
- Joined: Tue Sep 08, 2009 5:15 pm
As the title says, great work on the logo, I am proud to have it showing on my profile! I thought I would post this video to, of an XMOS based robot I have seen out in the wild!
-
- Respected Member
- Posts: 377
- Joined: Thu Dec 10, 2009 6:07 pm
Does anyone want to build a robot "base" platform with an XMOS chip/board?
I would buy one of these - a development kit for building XMOS-based robotis. I think you would find quite a few others would too. Does anyone have any experience in this area?
Jonathan
I would buy one of these - a development kit for building XMOS-based robotis. I think you would find quite a few others would too. Does anyone have any experience in this area?
Jonathan
-
- XCore Expert
- Posts: 577
- Joined: Tue Sep 08, 2009 5:15 pm
More details see this thread: http://xcore.com/forum/viewtopic.php?f=21&t=365
-
- XCore Expert
- Posts: 577
- Joined: Tue Sep 08, 2009 5:15 pm
Quote: "Demonstration of XMOS real-time ability. This test is running 8 independent tasks: gps task, ultra-sonic task, compass task, wifi receive task, wifi transmit task, pwm output task, behavior task, status led task."
See more videos and comments here: http://xcore.com/forum/viewtopic.php?f=21&t=360
See more videos and comments here: http://xcore.com/forum/viewtopic.php?f=21&t=360
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
Hi folks
I am involved in an electromechanical project in which I need to build a control board, rather than doing a one off I decided on reuse of the main Xmos board. I figured everyone here is likely to be interested in a basic control and robotics board so please let me know your thoughts in this thread:
http://xcore.com/forum/viewtopic.php?f=14&t=524
regards
Al
I am involved in an electromechanical project in which I need to build a control board, rather than doing a one off I decided on reuse of the main Xmos board. I figured everyone here is likely to be interested in a basic control and robotics board so please let me know your thoughts in this thread:
http://xcore.com/forum/viewtopic.php?f=14&t=524
regards
Al
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
Hi folks
I am involved in an electromechanical project in which I need to build a control board, rather than doing a one off I decided on reuse of the main Xmos board. I figured everyone here is likely to be interested in a basic control and robotics board so please let me know your thoughts in this thread:
http://xcore.com/forum/viewtopic.php?f=14&t=524
regards
Al
I am involved in an electromechanical project in which I need to build a control board, rather than doing a one off I decided on reuse of the main Xmos board. I figured everyone here is likely to be interested in a basic control and robotics board so please let me know your thoughts in this thread:
http://xcore.com/forum/viewtopic.php?f=14&t=524
regards
Al