Custom XMOS Boards

Post Reply
User avatar
rp181
Respected Member
Posts: 395
Joined: Tue May 18, 2010 12:25 am
Contact:

Custom XMOS Boards

Post by rp181 »

Provide access to necessary files for the designing of custom boards.
Read


User avatar
rp181
Respected Member
Posts: 395
Joined: Tue May 18, 2010 12:25 am
Contact:

Post by rp181 »

Made this group to maintain files good to have to make boards. I know i made some, will find and upload.
User avatar
rp181
Respected Member
Posts: 395
Joined: Tue May 18, 2010 12:25 am
Contact:

Post by rp181 »

Thread for places to make PCBs:

http://www.xcore.com/forum/viewtopic.php?f=7&t=4
User avatar
rp181
Respected Member
Posts: 395
Joined: Tue May 18, 2010 12:25 am
Contact:

Post by rp181 »

144 BGA for the G4 eagle library as well as others. Unchecked.

http://xcore.com/forum/download/file.php?id=246

taken from this thread: http://xcore.com/forum/viewtopic.php?f=7&t=135&start=30

XS!-L2-124QFN footprint: http://www.leonheller.com/XMOS/XS1-L2-124QFN%20(BO).gif
User avatar
rp181
Respected Member
Posts: 395
Joined: Tue May 18, 2010 12:25 am
Contact:

Post by rp181 »

Started the wiki page. Feel free to add!
User avatar
lilltroll
XCore Expert
Posts: 956
Joined: Fri Dec 11, 2009 3:53 am
Location: Sweden, Eskilstuna

Post by lilltroll »

Many people have done some L1 board's, but isn't there any custom made board for the QFN or BGA IC's yet ??
In general people seems to want's USB2.0 connection /Ethernet, SDRAM connection, and I/O to some device.
Probably not the most confused programmer anymore on the XCORE forum.
User avatar
Vaati
Active Member
Posts: 39
Joined: Sat Dec 25, 2010 7:09 pm
Contact:

Post by Vaati »

Is there a library for the G4 BGA 512? I would like to avoid creating the part from scratch if someone else has already done so...

Thanks
User avatar
russf
XCore Addict
Posts: 146
Joined: Thu Dec 10, 2009 10:17 pm
Contact:

Post by russf »

Today I published our first library, containing two XMOS XS1-L1 variants (64,128). Look at the project for a link to the github repo.

I also have a second repo that has a general set of components I'm using, and also a library called xmossupport, which contains parts found on some of the XMOS reference designs. https://github.com/topiaruss/KiCad-Parts

Good luck. Pull requests encouraged.

--r

narutoxela
Active Member
Posts: 46
Joined: Wed Apr 20, 2011 9:30 pm

Post by narutoxela »

Hi everyone, I'm here to announce that I finished a library for Eagle CAD including all the xmos chips currently available. It is available on the projects page.
Post Reply