MFi features of xCORE-200 Multichannel Audio Platform

Technical questions regarding the XTC tools and programming with XMOS.
Post Reply
nico
Active Member
Posts: 33
Joined: Tue Feb 16, 2016 12:51 pm

MFi features of xCORE-200 Multichannel Audio Platform

Post by nico »

Hi,

I have designed a board (non MFi at the moment but I included the footprint for Apple coproc) based on xCORE-200 Multichannel Audio Platform. I have the MFi agreement and I have bought 2 MFi versions of the eval board to start developping the MFi version of my board.
It is not clear to me how the MFi version works. The eval board has a lightning connector but I would like to use only USB A connector on my final design. The iDevice should be connected to my board with the standard USB/lightning connector and my board should allow the iDevice to charge (while being a usb audio device).
Is that possible ?
I am not sure to understand the ACC_DETECT from the MFi design ...

Thanks for your help,
Regards,
Nicolas


User avatar
xsamc
Active Member
Posts: 55
Joined: Fri Mar 04, 2011 3:38 pm

Post by xsamc »

Hi Nicolas,

The XMOS MFi reference designs and all MFi related materials are covered by NDA, and as such cannot be discussed in a public forum. Please open a ticket via the support pages of xmos.com for any MFi related queries.

Best regards,
Sam
nico
Active Member
Posts: 33
Joined: Tue Feb 16, 2016 12:51 pm

Post by nico »

Of course !
Thanks for the remainder.


Regards,
Nicolas
Post Reply