I think the power stage is all right first appears 3,3V and about 2,5 to 3 ms later appears the 1V and another ms later the reset signal goes high.xflash conet_8ch.xe --boot-partition-size 0x80000 --quad-spi-clock 15.62MHz
xrun: Cannot load image, XCore 0 is not enabled
real 0m8.852s
user 0m6.867s
sys 0m0.156s
I hat 26 cards where 5 of tham had this problem.
xflash -k shows:
xflash -l
Available XMOS Devices
----------------------
ID Name Adapter ID Devices
-- ---- ---------- -------
0 XMOS XTAG-3 525wtOrL O[0]