Hello,
I can't understand switches(S1&S3) and Jumper(J12) on XR-AVB-LC-BRD. The document is just "AVB Endpoint Quick Start Guide" as shown below link.
https://www.xmos.com/support/boards?pro ... nent=16890
What do S1&S3&J12 mean? How do S1&S3&J12 work?
Please provide the explanations.
Thanks,
Kasebe
What are S1&S3&J12 on XR-AVB-LC-BRD? Topic is solved
-
Kasebe
- Member++
- Posts: 28
- Joined: Tue Jan 07, 2014 7:49 am
-
henk
- Respected Member
- Posts: 347
- Joined: Wed Jan 27, 2016 5:21 pm
Hi,
J12 enables you to select the on-board ADC rather than the signal from the expansion header
S1 and S3 are software programmable switches; I don't know what the standard software does with them.
The schematics are on <https://www.xmos.com/download/private/A ... 2.0%29.pdf> I believe.
Cheers,
Henk
J12 enables you to select the on-board ADC rather than the signal from the expansion header
S1 and S3 are software programmable switches; I don't know what the standard software does with them.
The schematics are on <https://www.xmos.com/download/private/A ... 2.0%29.pdf> I believe.
Cheers,
Henk