Hi,
I am brand new to the XMOS world and just got a new XK-USB-MIC-UF216 two days back.
What I have done
1. I followed the https://www.xmos.com/developer/publishe ... vers-linux to enable the USB driver (lsusb shows the device).
2. Got the software code archive sw_usb_audio-[sw]_6.15.2rc1 and imported it to my XTIMEComposer
The Run configuration on the IDE shows the Target list as XMOS XTAG-3 .... So I selected that, then 'Apply' and 'Run'. I see the LED (D4)on the Xtag blink continuously.
But nothing else happens. There are no logs on the console and I presume audio capture is not working (as the mic LEDs don't blink).
On the mic array board, only the center LED is tuned ON and solid red.
So I need hep with
1. How do I proceed to start capturing on the device?
2. Will arecord -L list the mic array as a device? If not is there a way to achieve this ?
Thank you for your time.
XK-USB-MIC-UF216 in Ubuntu 16.04 - No audio capture.
-
- New User
- Posts: 3
- Joined: Mon Nov 12, 2018 9:37 pm
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
Hi. Would you please review this thread and report your findings?
http://www.xcore.com/viewtopic.php?f=3& ... F216+linux
In your Linux box, what are the Vendor & Device IDs?
Does this kit get enumerated in your box? Please post the log from this command.
lsusb >> xmos_log.txt
http://manpages.ubuntu.com/manpages/xen ... usb.8.html
https://www.youtube.com/watch?v=ysutyKGpqlE
https://askubuntu.com/questions/668829/ ... -not-found
http://www.xcore.com/viewtopic.php?f=3& ... F216+linux
Code: Select all
http://www.xcore.com/viewtopic.php?f=3&t=6064&hilit=XK+USB+MIC+UF216+linux
Code: Select all
lsusb
lsusb >> xmos_log.txt
http://manpages.ubuntu.com/manpages/xen ... usb.8.html
https://www.youtube.com/watch?v=ysutyKGpqlE
Code: Select all
http://manpages.ubuntu.com/manpages/xenial/man8/lsusb.8.html
Code: Select all
https://askubuntu.com/questions/668829/lsusb-command-not-found
-
- New User
- Posts: 3
- Joined: Mon Nov 12, 2018 9:37 pm
Thank you for helping me out. Xmos support sent me the following email and with it I was able to capture audio data using arecord as well as audacity
" The issue has to do with a recently hardware revision conflicting with our older USB library. Please follow this design advisory to compile a working binary for the board. It's essentially just drag and drop replacing the USB related libs in the software project:
https://www.xmos.com/developer/download ... 1.0%29.pdf "
" The issue has to do with a recently hardware revision conflicting with our older USB library. Please follow this design advisory to compile a working binary for the board. It's essentially just drag and drop replacing the USB related libs in the software project:
https://www.xmos.com/developer/download ... 1.0%29.pdf "
-
- New User
- Posts: 3
- Joined: Mon Nov 12, 2018 9:37 pm
Thank you for helping me out. Xmos support sent me the following email and with it I was able to capture audio data using arecord as well as audacity
" The issue has to do with a recently hardware revision conflicting with our older USB library. Please follow this design advisory to compile a working binary for the board. It's essentially just drag and drop replacing the USB related libs in the software project:
https://www.xmos.com/developer/download ... 1.0%29.pdf "
" The issue has to do with a recently hardware revision conflicting with our older USB library. Please follow this design advisory to compile a working binary for the board. It's essentially just drag and drop replacing the USB related libs in the software project:
https://www.xmos.com/developer/download ... 1.0%29.pdf "