schematic review: minimal XE216-512-TQ128 board

XCore Project reviews, ideas, videos and proposals.
mst
Junior Member
Posts: 6
Joined: Wed Mar 13, 2019 9:51 pm

schematic review: minimal XE216-512-TQ128 board

Post by mst »

Hey,

for a project of mine (a USB audio interface), I have adapted the xCORE 200 eXplorer schematic as included in xCORE-200-explorerKIT-Hardware-Manual%281.2%29.pdf as best as I could.

Contrary to the eXplorer kit, my design is USB bus-powered, and contains a bunch fewer components. I will be using the XEF216 variant of the chip with built-in flash, so there is no external flash in my design.

As this is my first XMOS design, I would appreciate it a lot if someone could review my attached schematic and point out any issues.

Thank you very much in advance,
You do not have the required permissions to view the files attached to this post.
User avatar
mon2
XCore Legend
Posts: 1913
Joined: Thu Jun 10, 2010 11:43 am

Post by mon2 »

Hi. See section 8 of the datasheet for the XEF216 for the following details:
internal_flash_boot_resistor.png
Missing 1k PU on X0D01 to force the boot from the internal flash inside the XEF216 CPU.
You do not have the required permissions to view the files attached to this post.
User avatar
bear118
Active Member
Posts: 37
Joined: Wed Jan 09, 2019 10:57 am

Post by bear118 »

mon2 wrote:Hi. See section 8 of the datasheet for the XEF216 for the following details:

internal_flash_boot_resistor.png

Missing 1k PU on X0D01 to force the boot from the internal flash inside the XEF216 CPU.
Yes, otherwise you can't boot from internal flash.
mst
Junior Member
Posts: 6
Joined: Wed Mar 13, 2019 9:51 pm

Post by mst »

Thanks for pointing this out! This is now fixed.

The rest is okay, I assume? :)