XS-48 footprint /part

Technical questions regarding the XTC tools and programming with XMOS.
Post Reply
yzoer
XCore Addict
Posts: 133
Joined: Tue Dec 15, 2009 10:23 pm

XS-48 footprint /part

Post by yzoer »

Hi All!

Does anyone know if there's a footprint / part out for XMOS' new 48-pin part? Figured I'd ask here before I start creating my own. Particularly interested in Protel, DipTrace or Eagle...

Cheers,

Yvo


Top
User avatar
Bianco
XCore Expert
Posts: 754
Joined: Thu Dec 10, 2009 6:56 pm
Contact:
Contact Bianco

Post by Bianco »

Will Altium Designer do?
(Formerly known as Protel)
Top
User avatar
leon_heller
XCore Expert
Posts: 546
Joined: Thu Dec 10, 2009 10:41 pm
Location: St. Leonards-on-Sea, E. Sussex, UK.
Contact:
Contact leon_heller

Post by leon_heller »

All footprints are in this document:

http://www.xmos.com/published/device-package-user-guide

It only took me a couple of minutes to create one for the Pulsonix software I use.
Top
yzoer
XCore Addict
Posts: 133
Joined: Tue Dec 15, 2009 10:23 pm

Post by yzoer »

Thanks Leon!
Top
User avatar
TonyD
XCore Addict
Posts: 234
Joined: Thu Dec 10, 2009 11:11 pm
Location: Newcastle, UK
Contact:
Contact TonyD

Post by TonyD »

Hi Yvo
What PCB package are you using?
Top
yzoer
XCore Addict
Posts: 133
Joined: Tue Dec 15, 2009 10:23 pm

Post by yzoer »

Hi Tony,

Looking at DIP-Trace at the moment..

Cheers,

Yvo
Top
Post Reply

Return to “Development Tools and Programming”