Hi Jerome
Unlike FPGAs ports XS1 ports are fixed to certain pins within a given chip package, which chip are you using, maybe a different package choice might help.
regards
Al
parallel port pin assignment
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
-
- XCore Expert
- Posts: 844
- Joined: Sun Jul 11, 2010 1:31 am
You can also "remap the pins" in software, for example using a 256 byte table
(which then costs one cycle per byte, if you input/output per byte).
(which then costs one cycle per byte, if you input/output per byte).