parallel port pin assignment

Technical discussions around xCORE processors (e.g. xcore-200 & xcore.ai).
Post Reply
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm
Contact:

Post by Folknology »

Hi Jerome

Unlike FPGAs ports XS1 ports are fixed to certain pins within a given chip package, which chip are you using, maybe a different package choice might help.

regards
Al


User avatar
segher
XCore Expert
Posts: 844
Joined: Sun Jul 11, 2010 1:31 am
Contact:

Post by segher »

You can also "remap the pins" in software, for example using a 256 byte table
(which then costs one cycle per byte, if you input/output per byte).
Post Reply