powering the XCARD XC-1A

Technical discussions related to any XMOS development kit or reference design. Eg XK-1A, sliceKIT, etc.
Post Reply
User avatar
Gravis
Experienced Member
Posts: 75
Joined: Thu Feb 02, 2012 3:32 pm

powering the XCARD XC-1A

Post by Gravis »

is it possible to power the XCARD XC-1A by the 5V headers in the prototyping area? (bottom left in this image)
Image
using an actual plug is just another possible point of failure in my project.


User avatar
Bianco
XCore Expert
Posts: 754
Joined: Thu Dec 10, 2009 6:56 pm
Contact:

Post by Bianco »

I took a quick look at the schematics and this should be no issue.
The 5V of the headers are almost directly connected to the DC Jack (only a fuse inbetween).
Post Reply