Page 2 of 2

Re: lcd library

Posted: Wed May 09, 2018 1:27 pm
by danis
I tested this jtag adapter with another microcontroller( in XK-1A Dev Kit) and it was working.


Image

Re: lcd library

Posted: Wed May 09, 2018 2:09 pm
by mon2
Check the slide switch position on the mating bridge board between this xtag board and the slicekit. Has this slicekit worked before or is it factory new?

Re: lcd library

Posted: Wed May 09, 2018 2:42 pm
by danis
it was working before but not by me.



I changed makefile for my processor but didn't help
Image

Am I right that if I have marking US1150L2 C5 at my chip that matches to XS-L16A-128-QF124-C10? if to trust this document:

https://www.xmos.com/published/xcore-de ... rking-list

Re: lcd library

Posted: Wed May 09, 2018 9:43 pm
by mon2
Please review this thread and specifically the via that may be over etched on the PCB. We found this error after 3 days of review. The PCB supplier should not be in the business. Another developer confirmed he too had the same issue. Hope yours is ok but worth a quick review. Please post your results.

http://www.xcore.com/viewtopic.php?f=8& ... via#p19891