Blue Pill for XMOS?

All technical discussions and projects around startKIT
User avatar
ahenshaw
Experienced Member
Posts: 91
Joined: Mon Mar 22, 2010 8:55 pm

Blue Pill for XMOS?

Postby ahenshaw » Wed Jan 09, 2019 9:45 pm

It really seems odd that we can't get a development board for XMOS similar to the Blue Pill for the STM32: https://wiki.stm32duino.com/index.php?title=Blue_Pill.
I could see this as being rather popular.
CousinItt
Experienced Member
Posts: 98
Joined: Wed May 31, 2017 6:55 pm

Postby CousinItt » Thu Jan 10, 2019 7:23 pm

There have been such things: https://www.youtube.com/watch?v=-Wj8vBxFKy0

I'm not sure if anyone is doing something similar for the newer devices.
User avatar
ahenshaw
Experienced Member
Posts: 91
Joined: Mon Mar 22, 2010 8:55 pm

Postby ahenshaw » Fri Jan 11, 2019 5:06 pm

Yeah, I guess I meant something current and XMOS supported. The StartKit was cool, but the form-factor was so awkward that I'm sure that it impacted the use by hobbyists.
ozel
Active Member
Posts: 38
Joined: Wed Sep 08, 2010 10:16 am

Postby ozel » Tue Jan 15, 2019 10:48 am

I fully agree! There have been some attempts by the community in the past but it was ever enough to gain traction.
And now, with the recent website update, unfortunately it doesn't look like XMOS is still interested at all in offering a general purpose platform.

Personally, I started experimenting with the openFPGA ecosystem. The iCE40 and ECP5 series from Lattice combined with an (unofficial) open source toolchain looks pretty intriguing.
Projects on github to checkout: icestorm, yoysis, nextpnr, prjtrellis, migen/LiteX, SymbiFlow.
And there are loads of small boards: iceBreaker, tinyFPGA or UpDuino. The ice40 wouldn't replace a 1 or 2 tile xCore 200 chip for most applications. But the ECP5 comes close or even surpasses with its SERDES speeds. I'm currently trying to find that out :-).
Anyone else looking into this?
uth
Member
Posts: 14
Joined: Sun Jan 13, 2019 4:45 am

Postby uth » Fri Jan 18, 2019 8:45 am

That was probably not programmable so I deleted the post so not to confuse you... but when I browse datasheets of chips like XU208-256-QF48, a hot air soldering and the minimal circuits for making it run do not look complicated. The docs also look quite helpful. And the chip is around $10, has a USB interface and 500 MIPS.

Designing a PCB with an open license would be a good start, but I did no do PCB design in a while.

Who is online

Users browsing this forum: No registered users and 27 guests