Trouble with xscope (Explorer-Kit & XTAG2 1v0)

If you have a simple question and just want an answer.
Post Reply
User avatar
lilltroll
XCore Expert
Posts: 956
Joined: Fri Dec 11, 2009 3:53 am
Location: Sweden, Eskilstuna

Trouble with xscope (Explorer-Kit & XTAG2 1v0)

Post by lilltroll »

Toolchain: 14.1.2
XTAG: XTAG2 rev 1.0
Board: Explorer-kit (xCore-200)

OS: Win7-64 bit

*******************************************
I cannot make any of the xscope examples - like AN10089_xscope_printing work on my Explorer-kit.

If I change the enabled="false" in xSCOPEconfig + choosing JTAG connection, I get the printout over JTAG, but all atemps to use xSCOPE has failed.
xTIMEcomposer has autoselected/loaded the XCORE-200-EXPLORER.xn file by selecting the board in the makefile.

What to do ?
Has anyone else made xSCOPE work on the Explorer board ?



Probably not the most confused programmer anymore on the XCORE forum.
User avatar
johned
XCore Addict
Posts: 185
Joined: Tue Mar 26, 2013 12:10 pm
Contact:

Post by johned »

Hi There,

I use xSCOPE on my explorer board a lot, with no problems.

I do this from the tools by enabling xSCOPE in the run dialog.

Have you checked out our applications notes : https://www.xmos.com/support/appnotes ?

I hope this helps.

Best regards,

John

 

Post Reply