XS1-L1 TI DP83848 Ethernet PHY Prototype
Posted: Thu May 17, 2012 10:50 pm
Version: 2
Status: Complete
License: BSD
Download: /files/project_builds/xmos_dp83848.zip
This is a prototype board for the Texas Instruments (Formerly National Semiconductor) DP83848C Ethernet PHY.
http://www.ti.com/product/dp83848c
The main advantage of this PHY over the SMSC LANx products used in XMOS reference designs is that it is also available in an easy to solder LQFP-48 package.
The download contains the schematics, detailed BOM, PCB design, Gerber files, XN file and demo .xe file.
To use the PHY the following has to be changed in module_ethernet\src\server\eth_phy.xc:
#define PHY_ID 0x8001
#define PHY_ADDRESS 0x01 (depends on the hardware design, 0x01 is for this board)
It is likely that the TI TLK110 PHY can also be used on this design, they are pin compatible I believe, but I have yet to confirm it.
Images:
Status: Complete
License: BSD
Download: /files/project_builds/xmos_dp83848.zip
This is a prototype board for the Texas Instruments (Formerly National Semiconductor) DP83848C Ethernet PHY.
http://www.ti.com/product/dp83848c
The main advantage of this PHY over the SMSC LANx products used in XMOS reference designs is that it is also available in an easy to solder LQFP-48 package.
The download contains the schematics, detailed BOM, PCB design, Gerber files, XN file and demo .xe file.
To use the PHY the following has to be changed in module_ethernet\src\server\eth_phy.xc:
#define PHY_ID 0x8001
#define PHY_ADDRESS 0x01 (depends on the hardware design, 0x01 is for this board)
It is likely that the TI TLK110 PHY can also be used on this design, they are pin compatible I believe, but I have yet to confirm it.
Images: