Hello !!!
Guys, I want to use the SD card for reading data.
Mainly, This SD card connected to xmos StartKIT.
So,Please share me code for use this sd card into my device.
I already try to use library which given by,
https://github.com/xcore/sc_sdcard
But depended library to many even after fill still show error on it.
Pls help me out this problem.
Thank you.
SD card library example is not working.
Pls help for this problem.
I hope any one reply me.
Thank you.
I hope any one reply me.
Thank you.
Hi. Sorry, missed this post earlier...try the following:
1) Start with a fresh workspace
2) Select Edit perspective (left side of the screen) -> File (top bar menu) -> Create New xTimeComposer Project -> Select a project name of your choice -> Select the startKIT as your Target Hardware -> remove the check so that the Empty xC file is NOT created -> Finish. Leave this tool open.
3) Download from the SD card github sit you are referencing the entire project as a Zip file -> Select Clone or Download -> Download ZIP
4) Back to your xTimeComposer -> File -> Import -> Archive File -> locate with your browser the downloaded zipped file for the SD card from github. This tool will now import this project into your workspace.
5) Proceed to compile using -> Select the project name you selected at the top of this project tree -> Project -> Clean -> Build all. If all goes well, you should have a binary file generated with the .xe suffix.
Hope this helps. Post back if you have issues.
Good luck!
1) Start with a fresh workspace
2) Select Edit perspective (left side of the screen) -> File (top bar menu) -> Create New xTimeComposer Project -> Select a project name of your choice -> Select the startKIT as your Target Hardware -> remove the check so that the Empty xC file is NOT created -> Finish. Leave this tool open.
3) Download from the SD card github sit you are referencing the entire project as a Zip file -> Select Clone or Download -> Download ZIP
4) Back to your xTimeComposer -> File -> Import -> Archive File -> locate with your browser the downloaded zipped file for the SD card from github. This tool will now import this project into your workspace.
5) Proceed to compile using -> Select the project name you selected at the top of this project tree -> Project -> Clean -> Build all. If all goes well, you should have a binary file generated with the .xe suffix.
Hope this helps. Post back if you have issues.
Good luck!