I am trying a couple of examples for using xScope in real-time and offline mode and things largely seem alright aside from the start and end times of each reading being 0. Here is an example of xscope.xmt that gets generated when running in offline mode: You can see Start="0" End="0" for every single reading.
Code: Select all
<XtEvents>
<XtEventTypes>
<XtEventType Id="0" Type="2" Name="Sin Value" Units="ps" UserType="3" UserUnits="Value"/>
<XtEventType Id="1" Type="2" Name="Cos Value" Units="ps" UserType="3" UserUnits="Value"/>
<XtEventType Id="2" Type="2" Name="Tan Value" Units="ps" UserType="3" UserUnits="Value"/>
<XtEventType Id="255" Type="1" Name="Missing Data" Units="ps" UserType="0" UserUnits="None"/>
</XtEventTypes>
<XtEventColors>
<XtEventColor Id="0" R="148" G="0" B="211" KeyText="None"/>
<XtEventColor Id="1" R="255" G="69" B="0" KeyText="None"/>
<XtEventColor Id="2" R="218" G="165" B="32" KeyText="None"/>
<XtEventColor Id="255" R="255" G="0" B="0" KeyText="None"/>
</XtEventColors>
<XtGlobalStart MilliSecs="1555500715256"/>
<TotalXtEvents Number="0"/>
<XtEventRecords>
<Record Type="0" Color="0" Start="0" End="0" User="0.000000"/>
<Record Type="1" Color="1" Start="0" End="0" User="100.000000"/>
<Record Type="2" Color="2" Start="0" End="0" User="0.000000"/>
<Record Type="0" Color="0" Start="0" End="0" User="9.983342"/>
<Record Type="1" Color="1" Start="0" End="0" User="99.500420"/>
<Record Type="2" Color="2" Start="0" End="0" User="10.033467"/>
<Record Type="0" Color="0" Start="0" End="0" User="19.866934"/>
<Record Type="1" Color="1" Start="0" End="0" User="98.006660"/>
<Record Type="2" Color="2" Start="0" End="0" User="20.271004"/>
<Record Type="0" Color="0" Start="0" End="0" User="29.552021"/>
<Record Type="1" Color="1" Start="0" End="0" User="95.533646"/>
I terms of set-up, I am using the xCORE-200 MC Audio Platform 2v0 (XE216-512-TQ128) hardware, running from xTIME 14.3.3. The source code I am running is the same as AN10091 (I also tried AN00196 with the same result). The application notes I first read mentioned that there should be a Link="X0LD" in the .xn but I read that was superceded so I have Link="XL0" in my .xn:
Code: Select all
<Link Encoding="2wire" Delays="4,4" Flags="XSCOPE">
<LinkEndpoint NodeId="0" Link="XL0"/>
<LinkEndpoint RoutingId="0x8000" Chanend="1"/>
</Link>
Cheers