No. Only the following seven pins are required, RST_N, TRST_N, TMS, TCK, TDI, TDO and GND. The XMOS-Links and UART are only required for advanced debug. Therefore, those pins are not necessary for XTAG operation on production boards.
Are all pins of XSYS connector necessary for XTAG during pro Topic is solved
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am