I've created an XMOS based dev board but I cant come up with a good name for it. I am hoping someone here could come up with one to use. However, I need to be able to buy the domain of the name as well. Though, if someone suggests anything with "duino" in it, I'm going to snap.
It'll be open source and all, so nobody ask about that, I just need a good name before I post everything. Here's a pcb layout of the board.
Suggest a name for my new dev board
-
- Experienced Member
- Posts: 75
- Joined: Thu Feb 02, 2012 3:32 pm
Suggest a name for my new dev board
You do not have the required permissions to view the files attached to this post.
-
- Experienced Member
- Posts: 96
- Joined: Mon Mar 22, 2010 8:55 pm
X-DEV48
Last edited by ahenshaw on Mon Aug 27, 2012 6:23 pm, edited 1 time in total.
-
- Active Member
- Posts: 55
- Joined: Wed Jan 11, 2012 2:27 pm
what about "gravis-devboard" ? "gravismartboard" ?... or something like that. After all it's yours.
-
- XCore Addict
- Posts: 133
- Joined: Tue Dec 15, 2009 10:23 pm
How about GX-48, for Gravis' XMOS, 48pin? :-) Like the routing! How do you plan to solder the (presumably) USB to serial QFN btw? Relow oven?
-Yvo
-Yvo
-
- Experienced Member
- Posts: 117
- Joined: Tue Oct 18, 2011 3:28 pm
This board is looking good and simple one. Could tell which application you used to design this PCB?
regards
jags
regards
jags
-
- XCore Addict
- Posts: 133
- Joined: Tue Dec 15, 2009 10:23 pm
Looks like Eagle...
-
- Active Member
- Posts: 46
- Joined: Wed Apr 20, 2011 9:30 pm
GX-48 sounds pretty good to me :P Like the idea!yzoer wrote:How about GX-48, for Gravis' XMOS, 48pin? :-) Like the routing! How do you plan to solder the (presumably) USB to serial QFN btw? Relow oven?
-Yvo
-
- Experienced Member
- Posts: 75
- Joined: Thu Feb 02, 2012 3:32 pm
I ended up going with XDev and xdevboards.com as there will be a line of expansion boards.
The project should popup on kickstarter in the next week or so (IRS Y U SLOW ლ(ಠ_ಠლ)).
Also, I did use Eagle to design it.
GX-48 sounds like a SKU number.
The project should popup on kickstarter in the next week or so (IRS Y U SLOW ლ(ಠ_ಠლ)).
Also, I did use Eagle to design it.
GX-48 sounds like a SKU number.