How can i use Tile 1 on startKIT for USB and aps ?
thanks a lot!
How to debug and use the 2.Tile for USB on startKIT
-
- Newbie
- Posts: 1
- Joined: Sat Dec 10, 2011 2:03 pm
-
- XCore Addict
- Posts: 161
- Joined: Sun Jun 12, 2011 11:47 am
Short answer: You're not supposed to on the startKit
Long answer: You can, but it's a rather cumbersome process, using a solution based on the dynamic loading application note, the TP1 header and a spare XTAG2.
Long answer: You can, but it's a rather cumbersome process, using a solution based on the dynamic loading application note, the TP1 header and a spare XTAG2.
-
- XCore Expert
- Posts: 844
- Joined: Sun Jul 11, 2010 1:31 am
You don't need a JTAG adapter on TP1 during normal operation,
only while writing the code for the debug tile itself (or you can
do that completely blind, if you like frustration).
only while writing the code for the debug tile itself (or you can
do that completely blind, if you like frustration).