Hi everyone!
I am desperate trying to come up with a simple app that manages two Ethernet ports over a single tile of a L16. Using two different ethernet servers is not possible since they use many static resources.
I am using the XMOS slicekit XP-SKC-L2 and I have been playing with the AVB Audio Daisy Chain which includes an Ethernet server for two ports. However, when I get to isolate the server and combine it with a simple ping demo it throws a memory exception.
I am not sure about the functionality of this two ports server, there is no doc. I am super lost, and if someone could give me some piece of advice or guideline in my approach I would be REEEEEALLY appreciated.
THANKS A LOT.
:)
Simple app for two Ethernet ports [KINDA SOLVED]
-
- Member
- Posts: 12
- Joined: Fri Apr 25, 2014 3:35 pm
Simple app for two Ethernet ports [KINDA SOLVED]
Last edited by atena on Tue Dec 02, 2014 12:11 pm, edited 1 time in total.
-
- Member
- Posts: 12
- Joined: Fri Apr 25, 2014 3:35 pm
Ok guys,
finally I decided to go for a duplication of the MAC layer into a dual version which replicates the single port functionality into two ports.
You can see the module and a simple ping demo app on the two ports here.
The app is intended to be run over a SOMANET CORE C22 + COM ETHERNET.
Hope it helps someone.
finally I decided to go for a duplication of the MAC layer into a dual version which replicates the single port functionality into two ports.
You can see the module and a simple ping demo app on the two ports here.
The app is intended to be run over a SOMANET CORE C22 + COM ETHERNET.
Hope it helps someone.