I would like to use xConnect XL3 for xscope, is it possible to use XL3 and USB on concurrently on tile [1] ?
regards
Al
Link choice with XE216-512-TQ128
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
-
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
Yes that's fine. The pin muxing for ports vs links happens closest to the pin. What happens deeper inside the chip (ie. connection of ports to the USB PHY) is a don't care in this case.
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
Excellent I was hoping this was the case, now I can move ahead with my evil plan ;-)
-
- XCore Legend
- Posts: 1126
- Joined: Thu May 27, 2010 10:08 am
...Hmm USB connect evil plannow I can move ahead with my evil plan
Something like this except scaled up? http://www.thinkgeek.com/product/8a0f/
-
- XCore Legend
- Posts: 1274
- Joined: Thu Dec 10, 2009 10:20 pm
I seem to recall some USB missile firing action at the last Xmos hack session..infiniteimprobability wrote:...Hmm USB connect evil plannow I can move ahead with my evil plan
Something like this except scaled up? http://www.thinkgeek.com/product/8a0f/
BTW We really should have another Xmos hack session soon with the new 200 series featured