Version: 0.01
Status: Under development
License: MIT
Project for an autonomous roving robot for outdoor use.
Project details:
Track-based differential drive system
GPS navigation
Sonar and IR Sensors for obstacle detection and occupancy grid mapping
Integration with ArduIMU (Arduino Based 6 DOF Inertial Measurement Unit)
PicoITX System onboard with Wifi communications
Possible Additions
Xbee Communication/Telemetry
Webcam
More to come...
The project at this point includes a phidgets motor controller (which I plan to replace), also the onboard PicoITX system is running Windows XP which may be replacedby either Windows CE or with a Linux OS. I have several otre plans but I'm also open for ideas! I would like to make the system as modular and easy to use as possible to make it as portable as possible. I also want to move as much processing to the xmose as possible and I may purchase another XK-1 and "chain them together"
Protos ROV Robot
-
- Member++
- Posts: 21
- Joined: Fri Dec 11, 2009 3:42 pm
-
- Newbie
- Posts: 1
- Joined: Tue Dec 22, 2009 5:33 pm
Make that sucker 3D. Use 6 XK-1's !
Yes, I know I like overkill !
Yes, I know I like overkill !
-
- Member++
- Posts: 23
- Joined: Wed Feb 03, 2010 10:23 pm
I'm thinking of a robot that makes a map of it's surrounding and finds its own position with a kinect sensor:
http://www.youtube.com/watch?v=ho8KVOe_y08
Let me know if you are interested in that too.
http://www.youtube.com/watch?v=ho8KVOe_y08
Let me know if you are interested in that too.