Hello,
I'm wondering whether there is a way of setting up the USB functionality of the XCORE and then downloading the xe file directly via USB port. I've been looking through the forum but cannot find anything. Has anyone tried it?
I'm currently working on xCORE -200 MC AUDIO PCB. Any links would be also greatly appreciated.
Thanks!
Program directly via USB without using JTAG
-
- New User
- Posts: 2
- Joined: Thu Feb 01, 2018 6:20 am
-
- XCore Addict
- Posts: 185
- Joined: Tue Mar 26, 2013 12:10 pm
For USB Audio we support DFU. Please see the USB Audio Design Guide for further details : https://www.xmos.com/published/usb-audi ... ion=latest. This requires that the device is already programmed with a DFU enabled image.
Best regards,
John
Best regards,
John
-
- New User
- Posts: 2
- Joined: Thu Feb 01, 2018 6:20 am
Thanks John. I'll try and load some DFU code onto the chip and see if I can get it enabled.