I just want to say sorry, I found the bug and it was a HW fault. My connection beween XMOS board and audio board is not correct. The audio board has a faulty connection to Gnd on the MCLK_Select line, so the clock switch was working only when the audio board was not connected and I checked the clock swicth only without audio board...
So everything ist working fine now!
Thank you very much!!!
MB
Audio is playing too slow
-
muntablues
- Active Member
- Posts: 34
- Joined: Tue Dec 20, 2011 2:45 pm
-
infiniteimprobability
Verified - XCore Legend
- Posts: 1156
- Joined: Thu May 27, 2010 10:08 am
Glad it's all working!
-
Ross
Verified - XCore Legend
- Posts: 1163
- Joined: Thu Dec 10, 2009 9:20 pm
- Location: Bristol, UK
Be sure to check the start-up sequencing to avoid the PLL mode in that DAC (which I assume you wish to avoid..)
-
muntablues
- Active Member
- Posts: 34
- Joined: Tue Dec 20, 2011 2:45 pm
Hi Ross
I will look into it, but it should be ok *hope*
MB
I will look into it, but it should be ok *hope*
MB