I need a general purpose L1 64pin dev board for prototype having following specifications.
1) On board SIP memory for boot.
2) Two xlinks extend to connector to connect other L1 board.
3) Mode3 & mode2 pin connection can be set through U-link connector according to user demand.
4) Remaining all 1 bit and at least two 4 bit port extend to connector so that user can have 12 + 4+ 4 = 20 I/O poart.
Can anybody have this type of ready board or PCB design.
regards
jags
Required a general purpose L1 64pin dev board for prototype.
-
- Experienced Member
- Posts: 117
- Joined: Tue Oct 18, 2011 3:28 pm
-
- Active Member
- Posts: 45
- Joined: Wed Sep 08, 2010 10:16 am
I think their slicekit boards will address your needs.
The design appeared a while ago on the official github with a draft for an L2 core module spec:
https://github.com/xcore/hw_slicekit_sy ... cation.pdf
From the recent picture of the announced DJ-Kit Audio dev. board, it can be guessed they'll offer at least an L1/SU1 board, in that modular slice style, see http://www.xmos.com/products/developmen ... sbaudio2su
You could try to ask them for a preliminary schematic and planned release date..
The design appeared a while ago on the official github with a draft for an L2 core module spec:
https://github.com/xcore/hw_slicekit_sy ... cation.pdf
From the recent picture of the announced DJ-Kit Audio dev. board, it can be guessed they'll offer at least an L1/SU1 board, in that modular slice style, see http://www.xmos.com/products/developmen ... sbaudio2su
You could try to ask them for a preliminary schematic and planned release date..