I have a design based on the DJ kit SKC SU1 reference design.
Programing the flash with the development code (app_usb_aud_skc_su1_2ioxx.xe) gets things up and running. I can get USB 2.0 audio input and output.
I am having trouble changing the port to pin mapping in xTIMEcomposer. Changing I2S data lines to other pins in the code seems to do nothing when I flash my device.
Any help would be appreciated.
DJ kit port to pin mapping
-
TARS
- Junior Member
- Posts: 5
- Joined: Fri Mar 20, 2015 4:06 pm
-
infiniteimprobability
Verified - XCore Legend
- Posts: 1164
- Joined: Thu May 27, 2010 10:08 am
Hi,
if changes aren't making thier way through to the hardware then either:
- The changes you have made are not being picked up/made correctly
- You are not flashing your updated image
We'd need to see more (ie. details of changes) to work out where in the process things went amiss. Could you detail your changes?
Also, I assume that everything built OK with no errors?
if changes aren't making thier way through to the hardware then either:
- The changes you have made are not being picked up/made correctly
- You are not flashing your updated image
We'd need to see more (ie. details of changes) to work out where in the process things went amiss. Could you detail your changes?
Also, I assume that everything built OK with no errors?
Engineer at XMOS