I tried connecting M(MODE[2] and MODE[3]) with G(GND=Low) on startKIT TP1, but SPI Flash boot is executed.
How can I invalidate SPI Flash boot?
SPI Flash boot invalidation on startKIT Topic is solved
-
Kasebe
- Member++
- Posts: 28
- Joined: Tue Jan 07, 2014 7:49 am
-
sethu_jangala
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
The startKIT has an image burned in the OTP to change the standard behavior. This allows it to boot from non-standard flash pins. The OTP program also automatically determines whether to boot from SPI/JTAG.
-
Kasebe
- Member++
- Posts: 28
- Joined: Tue Jan 07, 2014 7:49 am
Thank you for your answer.
I gaved /CS=High on SPI Flash pin directly and it can be invalidated.
(Manufactured program from OTP booted.)
I gaved /CS=High on SPI Flash pin directly and it can be invalidated.
(Manufactured program from OTP booted.)