The new Motor Control Board is a really interesting kit.
It's only $150 (same price as the XC-2 Ethernet) but it comes with a huge amount more I/O!
What do you think of this kit? Possible game-changer for XMOS?
New Motor Control Board
-
- Respected Member
- Posts: 298
- Joined: Thu May 12, 2011 11:14 am
-
- XCore Expert
- Posts: 956
- Joined: Fri Dec 11, 2009 3:53 am
- Location: Sweden, Eskilstuna
How does it look up-side down ?
Can you stack it on a (selfmade) daughter board ?
Great price including some digital isolation !
Can you stack it on a (selfmade) daughter board ?
Great price including some digital isolation !
Probably not the most confused programmer anymore on the XCORE forum.
-
- Respected Member
- Posts: 298
- Joined: Thu May 12, 2011 11:14 am
I'll try get a picture of the bottom.lilltroll wrote:How does it look up-side down ?
We're updating the stock image on xmos.com because the connector is actually on the top side of the board, so you can actually stack other boards on top of this one.Can you stack it on a (selfmade) daughter board ?
-
- XCore Expert
- Posts: 956
- Joined: Fri Dec 11, 2009 3:53 am
- Location: Sweden, Eskilstuna
I think I took the first one from DigiKey. It is already in the hands of UPS.
Probably not the most confused programmer anymore on the XCORE forum.
-
- Respected Member
- Posts: 298
- Joined: Thu May 12, 2011 11:14 am
I meant the image on the website, not the actual board. You should get one with a top mounted connection.
-
- Respected Member
- Posts: 298
- Joined: Thu May 12, 2011 11:14 am
Make sure you let us know how you get on with the board!
-
- XCore Expert
- Posts: 956
- Joined: Fri Dec 11, 2009 3:53 am
- Location: Sweden, Eskilstuna
That was fast. Already in my little town i Sweden, and free shipping :)
Probably not the most confused programmer anymore on the XCORE forum.
-
- Respected Member
- Posts: 298
- Joined: Thu May 12, 2011 11:14 am
Oh fantastic! You'll be one of the first people to get their hands on one!lilltroll wrote:That was fast. Already in my little town i Sweden, and free shipping :)
-
- Respected Member
- Posts: 298
- Joined: Thu May 12, 2011 11:14 am
How are you getting on with the board?
-
- XCore Expert
- Posts: 956
- Joined: Fri Dec 11, 2009 3:53 am
- Location: Sweden, Eskilstuna
telnet 192.168.0.197phalt wrote:How are you getting on with the board?
XMOS Motor Control Board demonstration
Type 'HELP' for a list of commands
(Please use a line mode terminal)
Command:
ADC - Read the ADC
HALL - Read the Hall sensors
PWM1 a,b,c - Set the PWM values for motor 1
PWM2 a,b,c - Set the PWM values for motor 2
QEI - Read the quadrature encoder position
ADC
ADC1: 0x78 0xa0
ADC2: 0x80 0xa4
Probably not the most confused programmer anymore on the XCORE forum.