Hi All,
I mentioned on xmoslinkers that I'm working on getting bootloading functionality to work from an Arm Linux host (in particular, the Rev. C4 BeagleBoard running Gentoo Linux).
I've run into some difficulties compiling (missing references to xmos_xe_... and x_... functions), so I thought I'd ask about the compile process for the development tools.
Is there a particular order that things need to be done in? How does the FTDI d2xx library fit into all of this?
Many thanks,
Brendan
Compiling xgdb on Arm Linux
-
- Experienced Member
- Posts: 126
- Joined: Fri Feb 12, 2010 10:31 pm
-
- Member++
- Posts: 30
- Joined: Wed Feb 03, 2010 5:04 pm
I will double check that the code builds correctly on x86 linux from the download, hopefully I have not forgotten to include anything!bsmithyman wrote:Hi All,
I mentioned on xmoslinkers that I'm working on getting bootloading functionality to work from an Arm Linux host (in particular, the Rev. C4 BeagleBoard running Gentoo Linux).
I've run into some difficulties compiling (missing references to xmos_xe_... and x_... functions), so I thought I'd ask about the compile process for the development tools.
Is there a particular order that things need to be done in? How does the FTDI d2xx library fit into all of this?
Many thanks,
Brendan
What interface library do you have for the FTDI chip on arm linux? This is important as we are using the interface described here http://ftdichip.com/Documents/ProgramGu ... 00071).pdf
Without this interface you will have to re-write the ftdi to tools layer that we are using.
-
- Experienced Member
- Posts: 126
- Joined: Fri Feb 12, 2010 10:31 pm
Thanks, that's much appreciated :)___ wrote: I will double check that the code builds correctly on x86 linux from the download, hopefully I have not forgotten to include anything!
That's really going to be the trick, I think. If I understand how your system is set up, it uses the d2xx binary from FTDI and links to it, right? I don't believe that the FTDI library is available for the arm architecture, though the ftdi_sio driver is in the kernel tree. I'm still getting a feel for this, but this might be the fatal flaw in the whole plan.___ wrote: What interface library do you have for the FTDI chip on arm linux? This is important as we are using the interface described here http://ftdichip.com/Documents/ProgramGu ... 00071).pdf
Without this interface you will have to re-write the ftdi to tools layer that we are using.
-
- Member++
- Posts: 30
- Joined: Wed Feb 03, 2010 5:04 pm
Does libusb exist on the version of linux you have? This is what is used by the ftdi library to talk to USB devices. Also can you see the kernel log when you plug in you xmos development board? On x86 linux the dmesg command will output some useful information to the terminal, not sure whether you can get to this from your setup?
-
- Experienced Member
- Posts: 126
- Joined: Fri Feb 12, 2010 10:31 pm
Hi ___, sorry for the wait on my reply. Issuing dmesg gives the following output:___ wrote:Does libusb exist on the version of linux you have? This is what is used by the ftdi library to talk to USB devices. Also can you see the kernel log when you plug in you xmos development board? On x86 linux the dmesg command will output some useful information to the terminal, not sure whether you can get to this from your setup?
Code: Select all
[16533.428741] usb 1-2.4: new full speed USB device using ehci-omap and address 7
[16533.550903] usb 1-2.4: New USB device found, idVendor=0403, idProduct=6010
[16533.550933] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16533.550964] usb 1-2.4: Product: XC-1 1V0
[16533.550964] usb 1-2.4: Manufacturer: XMOS
[16533.550964] usb 1-2.4: SerialNumber: 77110198
[16533.556274] usb 1-2.4: configuration #1 chosen from 1 choice
[16533.566894] usb 1-2.4: USB disconnect, address 7
[16533.831176] usb 1-2.4: new full speed USB device using ehci-omap and address 8
[16533.923614] usbcore: registered new interface driver usbserial
[16533.924285] USB Serial support registered for generic
[16533.949798] usb 1-2.4: New USB device found, idVendor=0403, idProduct=6010
[16533.949829] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16533.949829] usb 1-2.4: Product: XC-1 1V0
[16533.949829] usb 1-2.4: Manufacturer: XMOS
[16533.949859] usb 1-2.4: SerialNumber: 77110198
[16533.950775] usb 1-2.4: configuration #1 chosen from 1 choice
[16533.955322] usbcore: registered new interface driver usbserial_generic
[16533.955352] usbserial: USB Serial Driver core
[16533.976623] USB Serial support registered for FTDI USB Serial Device
[16533.977630] ftdi_sio 1-2.4:1.0: FTDI USB Serial Device converter detected
[16533.978027] usb 1-2.4: Detected FT2232C
[16533.978057] usb 1-2.4: Number of endpoints 2[16533.978057] usb 1-2.4: Endpoint 1 MaxPacketSize 64
[16533.978057] usb 1-2.4: Endpoint 2 MaxPacketSize 64
[16533.978088] usb 1-2.4: Setting MaxPacketSize 64
[16533.979095] usb 1-2.4: FTDI USB Serial Device converter now attached to ttyUSB0
[16533.979187] ftdi_sio 1-2.4:1.1: FTDI USB Serial Device converter detected
[16533.979522] usb 1-2.4: Detected FT2232C
[16533.979553] usb 1-2.4: Number of endpoints 2[16533.979553] usb 1-2.4: Endpoint 1 MaxPacketSize 64
[16533.979553] usb 1-2.4: Endpoint 2 MaxPacketSize 64
[16533.979583] usb 1-2.4: Setting MaxPacketSize 64
[16533.980224] usb 1-2.4: FTDI USB Serial Device converter now attached to ttyUSB1
[16533.980316] usbcore: registered new interface driver ftdi_sio
[16533.980346] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
I'm currently running Gentoo Linux on the system, with a hand-compiled kernel 2.6.32 and the linux-omap patches.
Output of 'uname -a':
Code: Select all
Linux nymph 2.6.32.7-x7.1wallaby #7 Sun Feb 14 12:27:24 PST 2010 armv7l ARMv7 Processor rev 3 (v7l) OMAP3 Beagle Board GNU/Linux
Code: Select all
CHOST=armv7a-unknown-linux-gnueabi
ARCH=arm
CFLAGS="-Os -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -ftree-vectorize -fomit-frame-pointer"