From XTAG-2 Hardware Manual v1.0; Section 4 there is a pinout for the 2 x 10 female socket. Pin 1 has the incorrect direction listed.
It should read as "Host to Target" since the +5 volt rail is sourced from the USB interface and is able to supply power to the mated XMOS target device.
See attached.
XTAG-2 Typo
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
Thank you for letting us know about this. I will inform our team to get this fixed.