Dears,
some how I am feeling more and more stupid.
As I am playing around now with the 12.0 Beta1 (thanks to Matt it works now with XC-1A)
I wanted to play with the debugger in XDE. Unfortunately when I try to run in debugger i only get:
no such debugger
as a fault message.
With the XDE 11.11.1 it works fine.
Has some body else a similar observation or is it me not seeing what I do wrong?
Thanks a lot for helping
Regards
Frank
xTimeComposer 12.0 Beta1 OSX online debugger
-
- Experienced Member
- Posts: 69
- Joined: Sat Apr 30, 2011 6:19 pm
-
- Experienced Member
- Posts: 84
- Joined: Mon Jan 18, 2010 2:52 pm
Hi Frank.
There's a bug in the 12.0beta1 release which causes this error if a launch is created via the run configurations dialog, but then used to debug. Could this be what is happening in your case? If so, then a workaround is to create the lanuch config from the debug configurations dialog instead.
Hope this helps,
Cheers,
Kris.
There's a bug in the 12.0beta1 release which causes this error if a launch is created via the run configurations dialog, but then used to debug. Could this be what is happening in your case? If so, then a workaround is to create the lanuch config from the debug configurations dialog instead.
Hope this helps,
Cheers,
Kris.
-
- Experienced Member
- Posts: 69
- Joined: Sat Apr 30, 2011 6:19 pm
Hi Kris,
I will try that and let you know the result.
Thanks for helping, I got a bit stuck with the 12.0 after debuging did not work ;-)
See you around
Frank
I will try that and let you know the result.
Thanks for helping, I got a bit stuck with the 12.0 after debuging did not work ;-)
See you around
Frank