xTimeComposer: XDE Unable to locate XMOS toolchain libraries
-
- Junior Member
- Posts: 6
- Joined: Fri Oct 11, 2013 12:20 am
xTimeComposer: XDE Unable to locate XMOS toolchain libraries
After running xTimeComposer the following message appears: XDE Unable to locate XMOS toolchain libraries and states the environment variables are not set, however I have run the SetEnv.bat many times. Why isn't the script setting the variables?
-
- Experienced Member
- Posts: 111
- Joined: Sun Mar 06, 2011 11:39 pm
I had the same problem. I managed to fix it by obtaining administrative rights in Windows, then uninstalling and re-installing xTimeComposer.
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
If you run the "SetEnv.bat" command, it should set the environment variables. Could you upload the screen shot of the error which you are seeing while opening the tool. Also, is the Java version of your machine up to date? By the way, what version of the tool are you facing the issue with?
Thanks,
Sethu.
Thanks,
Sethu.
-
- Junior Member
- Posts: 6
- Joined: Fri Oct 11, 2013 12:20 am
I have tried running the SetEnv.bat many times but it is still giving me the error and yes Java is up to date. The tool version is 12.2.0.
You do not have the required permissions to view the files attached to this post.
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
Are you saying you double clicked on the SetEnv.bat file and ran it?I have tried running the SetEnv.bat many times but it is still giving me the error and yes Java is up to date. The tool version is 12.2.0.
If you are running from Windows command line, you need to do the following steps:
1. Open the command line (Windows command line) navigate to "C:\Program Files (x86)\XMOS\xTimeComposer\12.2.0" run the SetEnv.bat command.
2. Navigate to "xtimecomposer_bin" and run the "xtimecomposer.exe" command.
If you are running from XMOS command line, you need to follow these steps:
1. No need to run the SetEnv.bat file as this will be run when you open the XMOS command line.
2. Navigate to "xtimecomposer_bin" and run the "xtimecomposer.exe" command.
By double clicking the Icon from the desktop, are you not able to open the tool and run it?
Sethu.