Hello All.
As I'm still total newbie, I have a lot of questions.
I've made a small PCB, like USB Audio Reference Design, with small changes.
The software I use also from the Reference Design wih the minor changes.
Befor I will work with the final software, I want to be sure that my hardware is working, and with this I have a problem!
If I run this software on a Reference Design board - it works, but with my board - not. I cannot run it with XRUN, also XFLASH does not see the device (but maybe here I also doing something wrong?).
Can some of the experts to see my schematic (see attachment) - mayby something is wrong?
(do not pay attantion to R27,R27 values, theey are not correct at the schematics, but at PCB are OK).
Can also somebody from experts help with a small FAQ:
how is possible to check that the hardware is working, that XTAG is able to talck with CPU and with Flash Memory?
Thank you.
Need help with the simple custom board
-
- XCore Addict
- Posts: 139
- Joined: Sun Feb 23, 2014 11:30 am
Need help with the simple custom board
You do not have the required permissions to view the files attached to this post.
-
- XCore Expert
- Posts: 589
- Joined: Wed Feb 29, 2012 10:03 am
Make sure you follow the XMOS design checklist that is available in the data sheet of the device. You can find the device checklist from the following link:https://www.xmos.com/download/public/XS ... t%28X9681G%...