hi:
Do somebody write interrupt/exception handler?
Or Is the interrupt/exception not available for users?
By the way, I see UART code in http://github.xcore.com/sc_uart/generic.html
In the uart_rx_impl.xc, there is a function
static inline void trap()
{
asm("ecallf %0" : : "r"(0));
}
how do trap() work?
Thanks for hacker!
How to write Interrupt/Exception Handler?
-
- Member
- Posts: 15
- Joined: Fri Nov 11, 2011 9:57 am
-
- XCore Expert
- Posts: 968
- Joined: Thu Dec 10, 2009 9:20 pm
- Location: Bristol, UK
Trap() isn't a exception-handler in this case, but a function that raises one.
-
- XCore Expert
- Posts: 754
- Joined: Thu Dec 10, 2009 6:56 pm
Hi porsche,
For writing an exception handler, see: https://www.xcore.com/forum/viewtopic.php?f=26&t=626
For writing an interrupt handler see the timer interrupt implementation of my project FreeRTOS port, the file FreeRTOS\Source\portable\XCC\XMOS_XS1\port_asm.S file contains the handler (clock_int_), and the setup is done in init_system_.
The timer itself is declared in port_xc.xc. This should get you started.
For writing an exception handler, see: https://www.xcore.com/forum/viewtopic.php?f=26&t=626
For writing an interrupt handler see the timer interrupt implementation of my project FreeRTOS port, the file FreeRTOS\Source\portable\XCC\XMOS_XS1\port_asm.S file contains the handler (clock_int_), and the setup is done in init_system_.
The timer itself is declared in port_xc.xc. This should get you started.