First post here. I am very new to this device. there does not seem to be a wealth of information in the data sheet regarding this, so I thought I would ask here. My system is to be powered from an external source - not USB powered. It is unclear what must be done with the USB_VBUS pin in this situation.
Thanks in advance,
Dan
XHRA-2HPA USB_VBUS Pin for External Power Solutions
-
DHembree
- Experienced Member
- Posts: 75
- Joined: Fri Apr 15, 2016 6:46 pm
-
henkVerified
- Respected Member
- Posts: 347
- Joined: Wed Jan 27, 2016 5:21 pm
Hi Dan,
Welcome!
Connect USB_VBUS to the VBUS pin of your USB connector; then the device can see when it is plugged in.
Have a look at the example application diagram in the data sheet.
Cheers,
Henk
Welcome!
Connect USB_VBUS to the VBUS pin of your USB connector; then the device can see when it is plugged in.
Have a look at the example application diagram in the data sheet.
Cheers,
Henk