Hello!

First time on the site? Say hello here!
User avatar
williamk
Experienced Member
Posts: 114
Joined: Fri Oct 01, 2010 7:47 pm

Hello!

Postby williamk » Fri Oct 01, 2010 9:34 pm

I'm new here, just started up, haven't read the whole forum yet. ;-)

I already posted some info on the project I'm working on, but its very draft right now, as I have no idea what a single XMOS chip can do for me. :mrgreen:

In any event, I plan on reading more soon, and also taking a look at the IDE for some ideas.

:ugeek:

Best Regards, WilliamK @ Wusik Dot Com
Wusik Dot Com (http://www.Wusik.com)
William-K.com (http://www.William-K.com)
User avatar
bsmithyman
Experienced Member
Posts: 126
Joined: Fri Feb 12, 2010 10:31 pm

Postby bsmithyman » Fri Oct 01, 2010 10:08 pm

Hi williamk,

Welcome! Hopefully you find some of the examples interesting, and useful for your own work. Make sure to take a look at the projects, especially some of the project of the month winners. It can be very helpful to see what proportion of the processor resources each is using.

Also note that the XMOS website itself has lots of good examples and a great deal of useful documentation on the hardware and XC/C/assembler programming. Finally, it might be worth looking at the xmoslinkers site. It's read-only since XCore.com became fully operational, but there are still some discussion topics on there that haven't been repeated here.

Cheers,
Brendan
User avatar
williamk
Experienced Member
Posts: 114
Joined: Fri Oct 01, 2010 7:47 pm

Postby williamk » Fri Oct 01, 2010 10:12 pm

Thanks, I'm still learning my way around. 8-)

Wk
Wusik Dot Com (http://www.Wusik.com)
William-K.com (http://www.William-K.com)
User avatar
rp181
Respected Member
Posts: 395
Joined: Tue May 18, 2010 12:25 am

Postby rp181 » Sat Oct 02, 2010 4:04 am

Welcome. What are your particular interests?
User avatar
williamk
Experienced Member
Posts: 114
Joined: Fri Oct 01, 2010 7:47 pm

Postby williamk » Sat Oct 02, 2010 4:23 am

Learning how to make a prototype. I did try it a few years ago, so I have to re-start from scratch. The idea I posted on my project-draft. But soon I will have more info on what I want and some sketches too. :ugeek:
Wusik Dot Com (http://www.Wusik.com)
William-K.com (http://www.William-K.com)
User avatar
nassim
Experienced Member
Posts: 112
Joined: Sun Sep 05, 2010 3:39 pm

Postby nassim » Sun Oct 03, 2010 9:14 am

hi and welcome :D in our community and we hope to see your idea :) :)
User avatar
jason
XCore Expert
Posts: 577
Joined: Tue Sep 08, 2009 5:15 pm

Postby jason » Mon Oct 04, 2010 10:54 am

Welcome William! Just in case you are wondering where your project post went - it is now under "project proposals" section of the forum.

Who is online

Users browsing this forum: No registered users and 0 guests