Hello,
While evaluating lib_usb 3.1.1 I noticed that there is a dfu folder under a folder named "experimental". After searching the XMOS documentation, it looks like the only official mention of DFU support is with the usb audio 2.0 series of example firmware. So a few questions come up for me:
Are there any examples of using DFU outside of usb audio applications?
Is there any official documentation and/or examples using the DFU api in lib_usb?
Considering that the DFU library is marked experimental, is it not recommended to use this for production?
Thanks!
DFU in lib_usb 3.1.1
-
- Experienced Member
- Posts: 93
- Joined: Wed Sep 16, 2015 2:38 pm
-
- XCore Addict
- Posts: 185
- Joined: Tue Mar 26, 2013 12:10 pm
Hi,
Yes, the productized DFU and examples in the USB Audio reference design.
lib_usb is fine for products.
You should be careful with dfu and ensure you test thoroughly if you wish to use it as we can't make any guarantees.
Best regards,
John
Yes, the productized DFU and examples in the USB Audio reference design.
lib_usb is fine for products.
You should be careful with dfu and ensure you test thoroughly if you wish to use it as we can't make any guarantees.
Best regards,
John