AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz

Sub forums for various specialist XMOS applications. e.g. USB audio, motor control and robotics.
User avatar
xlordofpainx
Experienced Member
Posts: 78
Joined: Thu Mar 08, 2018 2:44 pm

Re: AN00231 SPDIF-Receive-to-I2S-output-using-ASRC x->192kHz

Postby xlordofpainx » Wed May 09, 2018 8:13 am

48 is coming from the spdif into the XMOS and 182360( or some similar gibberish) comes out of XMOS
User avatar
xlordofpainx
Experienced Member
Posts: 78
Joined: Thu Mar 08, 2018 2:44 pm

Postby xlordofpainx » Wed May 09, 2018 9:07 am

I used the program that you sent me. I changed the .xn file to xk-audio-216, i changed the ports, and i replaced the codec that you had used with cs4384_5368. But the console prints out when building:

09:58:47 **** Incremental Build of configuration Default for project AN00231_ASRC_SPDIF_TO_DAC ****
xmake CONFIG=Default all
Checking build modules
Using build modules: lib_gpio(1.1.0) lib_i2c(4.0.0) lib_i2s(2.3.0) lib_logging(2.1.1) lib_spdif(2.0.2) lib_src(1.1.1) lib_xassert(3.0.1)
xmake: *** [bin//AN00231_ASRC_SPDIF_TO_DAC.xe] Error 2

09:58:54 Build Finished (took 6s.943ms)

Doesn't exactly say what the bug is...
ffomich
Experienced Member
Posts: 114
Joined: Mon Sep 15, 2014 1:32 pm

Postby ffomich » Thu May 10, 2018 9:53 am

Try to clean project before build or manually delete .build & bin folders.
I use xTIMEcomposer 14.2.4
Ivanshi
New User
Posts: 2
Joined: Tue Mar 05, 2019 10:16 am

Postby Ivanshi » Tue Mar 05, 2019 10:29 am

I can't get 192kHz data with AN00231. Can you solve this problem? Or can you refer me to the program from ffomich? My email address is 604797603@qq.com
User avatar
mon2
XCore Legend
Posts: 1470
Joined: Thu Jun 10, 2010 11:43 am

Postby mon2 » Tue Mar 05, 2019 2:07 pm

Ivanshi
New User
Posts: 2
Joined: Tue Mar 05, 2019 10:16 am

Postby Ivanshi » Wed Mar 06, 2019 9:08 am

I know the app note was not designed to run at 192KHz,but this is what I want to do now.
I tried to modify the program, but it couldn't be implemented, so I hope to get help.
User avatar
akp
Respected Member
Posts: 302
Joined: Thu Nov 26, 2015 11:47 pm

Postby akp » Thu Mar 07, 2019 2:36 pm

Good luck. Report on your progress.

Who is online

Users browsing this forum: No registered users and 0 guests