Group buy: SMSC USB3318 ULPI PHY

Non-technical related questions should go here.
sjalloq
Active Member
Posts: 55
Joined: Tue Jan 12, 2010 1:49 pm

Group buy: SMSC USB3318 ULPI PHY

Postby sjalloq » Tue Jan 12, 2010 6:34 pm

Hey there,

I'm going to be putting in an order with DigiKey for some of the USB PHY's used on the XMOS development boards. The DigiKey product code is 638-1064-6-ND. I'll be ordering a minimum of 25 so the unit price will be $2.56 not including duy/VAT.

If you'd like one or more then please add a post here and I'll add them to the order. I plan on placing the order in a week so the evening of the 19th will be the cut-off date.

Also, if you want anything else from DigiKey feel free to add it to the order. I reserve the right to ask you for the money first or tell you to shove it if you ask for 100 bench power supplies or similar. :) I reserve the right to just say no as well.

Pricing will be calculated based on the item value + VAT + duty + packaging + shipping and will be required before I ship anything. Bank transfer or cheque only.

Shareef.
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm

Postby Folknology » Tue Jan 12, 2010 11:03 pm

Count me in for five
User avatar
TonyD
XCore Addict
Posts: 234
Joined: Thu Dec 10, 2009 11:11 pm
Location: Newcastle, UK

Postby TonyD » Wed Jan 13, 2010 10:21 am

I'll take 5 as well.

Try using www.digikey.co.uk as their prices are in sterling and include duties (but not VAT). They have USB3318 listed at £1.93 each.
User avatar
Bianco
XCore Expert
Posts: 754
Joined: Thu Dec 10, 2009 6:56 pm

Postby Bianco » Thu Jan 14, 2010 8:14 pm

And from where will you send it? Are you living in the UK?

The unit price (1 unit) is 2.19 euro. Not much to gain for me...
sjalloq
Active Member
Posts: 55
Joined: Tue Jan 12, 2010 1:49 pm

Postby sjalloq » Thu Jan 14, 2010 10:19 pm

I'm in the UK. What do you mean not much to gain?
sjalloq
Active Member
Posts: 55
Joined: Tue Jan 12, 2010 1:49 pm

Postby sjalloq » Wed Jan 20, 2010 4:23 pm

Hey chaps,

I need to add a few items to the DigiKey order so I hope to place it at the weekend. I'll keep you updated on progress.

As a side note, I've been trying to get hold of the datasheet for the 3318 part and have so far been unsuccessful. I can only assume that the UK disti's don't want to deal with me unless I'm prepared to say that I'm looking for 10K units.

Shareef.
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm

Postby Folknology » Wed Jan 20, 2010 4:46 pm

User avatar
leon_heller
XCore Expert
Posts: 546
Joined: Thu Dec 10, 2009 10:41 pm
Location: St. Leonards-on-Sea, E. Sussex, UK.

Postby leon_heller » Wed Jan 20, 2010 4:52 pm

That's just a data brief, not the data sheet.

I've just requested it via SMSC technical support. I have a feeling that an NDA might be required.

Leon
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm

Postby Folknology » Wed Jan 20, 2010 5:18 pm

Oops sorry it was a preview, didn't look close enough was just concentrating on the landing patterns :?
User avatar
TonyD
XCore Addict
Posts: 234
Joined: Thu Dec 10, 2009 11:11 pm
Location: Newcastle, UK

Postby TonyD » Thu Jan 21, 2010 10:04 am

leon_heller wrote: I've just requested it via SMSC technical support. I have a feeling that an NDA might be required.
As Xmos have already used the USB3318 in there design and if there's no NDA, perhaps someone at Xmos could post the data sheet to this thread.

Who is online

Users browsing this forum: No registered users and 0 guests