XS1-L Hardware Design Checklist released by XMOS

Technical discussions around xCORE processors (e.g. General Purpose (L/G), xCORE-USB, xCORE-Analog, xCORE-XA).
User avatar
jonathan
Respected Member
Posts: 377
Joined: Thu Dec 10, 2009 6:07 pm

XS1-L Hardware Design Checklist released by XMOS

Postby jonathan » Thu Apr 29, 2010 7:51 am

For anyone that hasn't seen it yet:
XMOS wrote:This document is intended for use by hardware designers using the XMOS XS1-L family of devices. It is a checklist of items that should be included in all XS1-L designs to ensure correct operation. For further details refer to the relevant device datasheet.
http://www.xmos.com/published/xs1lcheck

Or for twitter:

http://bit.ly/aGjOyT

Could prove useful for those interested in building their own boards using the L series parts.

Hopefully some of those people will be at the OSHUG meeting tonight (Thursday 29th) in London, featuring XMOS CTO David May and Alan Wood (Folknology).
Image
User avatar
TonyD
XCore Addict
Posts: 234
Joined: Thu Dec 10, 2009 11:11 pm
Location: Newcastle, UK

Postby TonyD » Thu Apr 29, 2010 8:45 am

Jonathan, thanks for the pointer.

Good luck to those attending the OSHUG (Open Source Hardware User Group) tonight, I hope you all have a great event.

I hope someone (Jason?) has a video camera handy to capture the talks.
User avatar
Folknology
XCore Legend
Posts: 1274
Joined: Thu Dec 10, 2009 10:20 pm

Postby Folknology » Fri Apr 30, 2010 10:38 am

The Osmosoft team recorded both presentations on video so I will see if we can get those shared. However the light level was fairly low and there was some ambient noise from the traffic which may make the quality a bit poor. Lets wait an see how they turn out..

Who is online

Users browsing this forum: No registered users and 1 guest