PC software to configure xCORE-200 Multichannel Audio Platform (XK-AUDIO-216-MC-AB)

Technical discussions related to any XMOS development kit or reference design. Eg XK-1A, sliceKIT, etc.
maqu67
Member++
Posts: 16
Joined: Tue Jan 23, 2018 3:26 pm

PC software to configure xCORE-200 Multichannel Audio Platform (XK-AUDIO-216-MC-AB)

Postby maqu67 » Tue Aug 07, 2018 10:38 am

Hello,

does exist a PC software (user application) to configure the xCORE-200 Multichannel Audio Platform (XK-AUDIO-216-MC-AB).
I've read that is possible to arrange the input/output channel maps, change the volume and so on. Is there a ready software
to send these commands via USB?

Thanks a lot in advance

Massimiliano
User avatar
andrewxcav
Active Member
Posts: 61
Joined: Wed Feb 17, 2016 5:10 pm
Contact:

Postby andrewxcav » Thu Sep 13, 2018 3:23 pm

The device appears like a sound card to your OS, so whatever tools (alsa mixer, audio midi setup, windows sound options) that your OS uses for these operations should work with that board.
udoctoryet
Junior Member
Posts: 5
Joined: Thu Nov 29, 2018 2:38 am

Postby udoctoryet » Tue Dec 04, 2018 1:08 am

On that note, is there anything you need to do to be able to record 4 input microphone data at the same time? I have 4 microphones plugged into the ports, but can only record from 2 at a time through like Audacity or garageband. I'm confident both ports work because when I unplug one of the two stereo pairs, I can still record using the remaining one.
MaximLiadov
Member++
Posts: 26
Joined: Mon Apr 16, 2018 9:14 am

Postby MaximLiadov » Mon Dec 24, 2018 8:34 am

To record more than 2 channels you need an ASIO host like Cubase, Audition, Ableton, so on.
MaximLiadov
Member++
Posts: 26
Joined: Mon Apr 16, 2018 9:14 am

Postby MaximLiadov » Mon Dec 24, 2018 8:47 am

maqu67 wrote:Hello,

does exist a PC software (user application) to configure the xCORE-200 Multichannel Audio Platform (XK-AUDIO-216-MC-AB).
I've read that is possible to arrange the input/output channel maps, change the volume and so on. Is there a ready software
to send these commands via USB?

Thanks a lot in advance

Massimiliano


No good news for you as a customer. EVB is not intended for you at all.

Being a manufacturer you have to buy Thesycon drivers and SDK. There is a control pannel & mixer example inside Thesycon SDK. Exactly that you were looking for. Price is just insane (from $2500 + $2000 monthly til $30000). More info at Thesycon website. Though, if you hire your own dev team to R&D drivers and mixer "from scratch" you would spend even more money with no any success guarantee.

Who is online

Users browsing this forum: No registered users and 110 guests