I am designing a board using the XE216-512-TQ128 and want to use pins X0D40 through X0D43 for my application but I notice on the xCORE-200 explorer board these pins are used for the uplink. Is it possible to move these 4 pins to tile 1 on the device? If so how do I reconfigure the xTAG system to recognise the change?
Thanks
John
Can I move the xTag uplink pins from tile 0 to tile 1?
-
- New User
- Posts: 3
- Joined: Thu Nov 01, 2018 6:41 pm
-
- XCore Legend
- Posts: 1913
- Joined: Thu Jun 10, 2010 11:43 am
Hi. Have not personally tested this but yes, it should be possible.
1) The .XN file used by the toolchain offers the details on which links will be used:
https://www.xmos.com/developer/publishe ... ion-manual
2) From a quick review of the datasheet:
https://www.xmos.com/developer/download ... .16%29.pdf
XL3 appears to be the pair you will want to use. Conjure up a sample project using the default XLINKS -> review the XN file and format -> then manually change it to XL3 and test away.
Here you go, courtesy of Redeye:
http://www.xcore.com/viewtopic.php?t=5057
1) The .XN file used by the toolchain offers the details on which links will be used:
https://www.xmos.com/developer/publishe ... ion-manual
Code: Select all
https://www.xmos.com/developer/published/xconnect-link-naming-convention-manual
https://www.xmos.com/developer/download ... .16%29.pdf
XL3 appears to be the pair you will want to use. Conjure up a sample project using the default XLINKS -> review the XN file and format -> then manually change it to XL3 and test away.
Here you go, courtesy of Redeye:
http://www.xcore.com/viewtopic.php?t=5057
Code: Select all
http://www.xcore.com/viewtopic.php?t=5057
You do not have the required permissions to view the files attached to this post.
-
- New User
- Posts: 3
- Joined: Thu Nov 01, 2018 6:41 pm
Excellent Thanks