Audio USB in light of S1-L Hardware Design Checklist

Technical discussions related to any XMOS development kit or reference design. Eg XK-1A, sliceKIT, etc.
bearcat
Respected Member
Posts: 283
Joined: Fri Mar 19, 2010 4:49 am

Post by bearcat »

Thanks for the clarification Woody.
Top
bearcat
Respected Member
Posts: 283
Joined: Fri Mar 19, 2010 4:49 am

Post by bearcat »

Have a question on the USB ULPI port table as attached above. Pin XnD36 in shown as a green pin (can be used). This signal is also P1M0 / P8D0 / P16B8.

This signal is the only shared pin that is shown as green. It is also the first bit of the 8 bit port P8D.

Wanted to double check if XnD36 is a green pin?
Top
User avatar
Woody
XCore Addict
Posts: 165
Joined: Wed Feb 10, 2010 2:32 pm

Post by Woody »

bearcat wrote:Have a question on the USB ULPI port table as attached above. Pin XnD36 in shown as a green pin (can be used). This signal is also P1M0 / P8D0 / P16B8.

This signal is the only shared pin that is shown as green. It is also the first bit of the 8 bit port P8D.

Wanted to double check if XnD36 is a green pin?
Yes, XnD36 is and should be Green. Basically this means that you can use P1M0 when you are using ULPI.
Top

Return to “Other XMOS Development Kits”