WINNER ANNOUNCED - July Competition
-
- Newbie
- Posts: 1
- Joined: Sat Jul 12, 2014 11:02 pm
Interface to real railroad interlocking equipment to connect it to a model of the railway that was once controlled by it.
-
- Newbie
- Posts: 1
- Joined: Sun Jul 13, 2014 7:06 pm
Use this bord to create audio test for mass production
-
- Newbie
- Posts: 1
- Joined: Sun Jul 13, 2014 11:22 pm
Hardware host synthesizer with interchangeable software plugins, which allows you to upload different types of synthesis - VA, FM, PD, Wavetable ...
-
- New User
- Posts: 3
- Joined: Mon Jul 14, 2014 2:52 am
A Portable ECG Monitor and Analyzer with real-time algorithms for automated ECG signal analysis and interpretation.
-
- Newbie
- Posts: 1
- Joined: Mon Jul 14, 2014 3:44 am
32bit/384K Audio module.
-
- Newbie
- Posts: 1
- Joined: Mon Jul 14, 2014 8:42 am
Real-time controller for industrial grade 6-axis robot with integrated collision detection system
-
- Newbie
- Posts: 1
- Joined: Mon Jul 14, 2014 10:56 am
Program based on neural network principle of several neural layers to be computed parallelly (thanks to 16 cores of XCORE) to precise control my DIY SEGWAY-like or WHELIE self balancing vehicle enabling to adapt to changing load
-
- Active Member
- Posts: 51
- Joined: Mon Dec 16, 2013 3:23 pm
As I should have guessed, it's meetings central here at XMOS HQ at the moment!
I will endeavour to get the winner's idea chosen soon, and the 10 runners up poll going ASAP.
Apologies for the delay.
I will endeavour to get the winner's idea chosen soon, and the 10 runners up poll going ASAP.
Apologies for the delay.
-
- Active Member
- Posts: 51
- Joined: Mon Dec 16, 2013 3:23 pm
Just a quick update:
The winner and 10 runners up (to be entered into the poll) have been chosen and I have just Private Messaged the winner!
Once they respond to confirm, i'll formally announce them and open a new thread/poll for the runners up.
We'll delay the close of the poll so that it lasts 1 week.
The winner and 10 runners up (to be entered into the poll) have been chosen and I have just Private Messaged the winner!
Once they respond to confirm, i'll formally announce them and open a new thread/poll for the runners up.
We'll delay the close of the poll so that it lasts 1 week.
-
- Active Member
- Posts: 51
- Joined: Mon Dec 16, 2013 3:23 pm
I can now happily say:
USB-based with autonomous capabilities (SD card), multi-plateform, multi-axis, high-speed and flexible CNC controller unit.
The winning project and 10 'runners up' were chosen by Matt Fyles, our Director of Software Tools Development.
Another thread will follow for the next round poll.
Congratulations BBenJ!!
BBenJ is the winner of our first USB sliceKIT round. Our runners up who will be entered into the second round community poll are:- Folknology
- mhanuel
- tshelley
- AlexSousa
- srpsco
- tronicgr
- rpflaum
- guitinker
- JasonWhiteman
- grzeziek
USB-based with autonomous capabilities (SD card), multi-plateform, multi-axis, high-speed and flexible CNC controller unit.
The winning project and 10 'runners up' were chosen by Matt Fyles, our Director of Software Tools Development.
Another thread will follow for the next round poll.