DFU questions

Technical questions regarding the xTIMEcomposer, xSOFTip Explorer and Programming with XMOS.
cps3113
New User
Posts: 3
Joined: Fri Apr 27, 2018 9:58 am

Re: DFU questions

Postby cps3113 » Fri Apr 27, 2018 10:22 am

Hi dweeb4.
I wanted to ask.
Can I get a .bin file from you?
dweeb4
Active Member
Posts: 52
Joined: Mon Jan 19, 2015 12:47 pm

Postby dweeb4 » Fri Apr 27, 2018 10:47 am

Hi cps
I had a disk crash which had all my XMOS stuff on it & haven't gone back to it
You can get this .bin file yourself if you follow the instructions, no?
cps3113
New User
Posts: 3
Joined: Fri Apr 27, 2018 9:58 am

Postby cps3113 » Sat Apr 28, 2018 1:23 pm

Hi dweeb4.
I can not get the original .bin because I already erased it.
It's too bad that you could not help.
Can tell me who to ask.
DIYINHK does not send his .bin
cps3113
New User
Posts: 3
Joined: Fri Apr 27, 2018 9:58 am

Postby cps3113 » Sun Apr 29, 2018 4:01 pm

Hi dweeb4.
I can not get my .bin file.
I asked you in the hope of restoring my diyinhk.
User avatar
mon2
XCore Legend
Posts: 1707
Joined: Thu Jun 10, 2010 11:43 am

Postby mon2 » Fri May 22, 2020 5:01 pm

@cps3113, are you still looking for this missing firmware?

Which kit from the vendor DIYINHK do you have?

Considering to source a low cost audio PCB for experiments. To reflash the XMOS CPU, you will need to have the XTAG3 tool. Do you have this external JTAG tool?

Who is online

Users browsing this forum: No registered users and 5 guests