2. I spent some time trying to flash on windows but still didn't have any luck. This is the following output I'm receiving
Code: Select all
Driver API DLL successfully loaded. API Version: 4.08
Downloading C:\Users\test\fw_upgr.bin to target 0 ...
State 6 (Failed), 0 of 52736 bytes downloaded ... .....
Download failed, completionStatus=0xEF000004
3. I've verified that the erase-all works since after I did a read back of the flash I got back 2mb of 0xF's for the entire read back. I did have to erase the flash through a different method though, the command provided was giving me issues.
Code: Select all
xflash --erase-all --verbose --spi-spec IS25LQ016B
Error: F03146 Input file for option --spi-spec IS25LQ016B not found
I also tested DFU on the Multichannel Audio Platform https://www.xmos.com/products/audio/kits and that worked just fine with xmosdfu on my Linux machine. So I'm left to believe that it's either the hardware/code. I've swapped out my board with several others that we have here and am running into the same issue across all of them so I think it's unlikely a hardware issue. The leads me to believe the problem must be laying in software somewhere.
I'm going to look through and see if there's a glaring difference in the project configs and XN files between the Multi Channel Board and the Mic Array board. I'll provide any updates if I find anything regarding any notable differences.