It seems I am to stupid to get things moving forward ;-(
I have running the xTimeComposer 12.0beta on my OSX 10.8.2
Have done my first Testprogram, but when I wanted to run it on the XC-1A the board does not get shown as Target in the run configuration.
I checked within the OSX System Information:
The XC-1A is there registered on USB:
Code: Select all
XC-1A 1V0:
Produkt-ID: 0x6010
Hersteller-ID: 0x0403 (Future Technology Devices International Limited)
Version: 5.00
Seriennummer: 81210268
Geschwindigkeit: Bis zu 12 MBit/s
Hersteller: XMOS
Standort-ID: 0xfd130000 / 5
Verfügbare Stromstärke (mA): 500
Erforderliche Stromstärke (mA): 500
I know I did have it running with one of the earlier XDEs but that one is gone as the related Computer was replaced.
Edit:
Just tried with XDE 11.2 and that one finds the board
Thanks in advance for helping
Frank